Team Associated RC10B7.1 Parts List

Use this page as a reference when ordering spares, rebuilding your car, or checking part numbers from the manual.

Bag 1 | Bag 2 | Bag 3 | Bag 4 | Bag 5 | Bag 6 | Bag 7 | Bag 8 | Bag 9

Bag 1

• heavy duty ballstud 8mm (10) (as91048)
• 4x7x2.5 bearings (AS31732)
• ballstud Washers 5.5 x 2.0mm Blue Aluminium x10 (as31383)
• steering bellcrank and rack set (as91973) OPTION: as91983
• hd ballstuds, short 6mm (as32042)
• steering hat bushing set (as91974)
• bhcs 3x12mm screws (as89202)
• ballstud washers 5.5 x 1.0mm blue aluminium x10 (as31382)
• top plate & ballstud mount (as92586) OPTION: as92587
• M3 x 3mm set screws (AS25225)
• anti roll bar hardware (as92457)
• front anti roll bar set (as92459)
• shcs 3x16mm screws (10) (as89224)

Bag 2

• chassis (as92400)
• Spur Gear Cover/Bumper/B-Head Shims (as92427)
• ft front bulkhead, 0 degree (as92436) OPTION: as92437
• fhcs 3x14mm screws (as89208)
• OPTION: weights 11g (as91976) \ 6.15g (as91975) \ 33g (as91977)
• battery foam set (as91988)
• screws, m2x3 mm fhcs (as91749)
• battery foam set (as91988)
• side rails (as92401) OPTION: as92402
• front wing mount, fan mounts & batt (as91978)
• rod ends (as92579)
• ballstud Washers 5.5 x 2.0mm Blue Aluminium x10  (as31383)
• m3 x 12mm set screw (as81258)
• servo horns 15.5mm (as91728)  OPTION: 23T (as1369) or 25T (as1370)
• hd ballstuds, short 8mm (as32040)
• m3x0.5x6mm bhcs (as31531)
• battery mount/fan mount/servo mount (as92418)
• M3X6mm Lp Shcs (EL41089)
• M3 x 10mm screws (AS25202)
• bhcs 3x16mm screws (as89203)
• top plate & ballstud mount (as92586) OPTION: as92587
• M3 x 3mm set screws (AS25225)
• anti roll bar hardware (as92457)
• Front Suspension Arms (as92574)
• m2 x 0.4 x 4mm bhcs (as31510)
• hinge pin set (as92496)
• Front Hinge Pin Brace (as71222)
• m2.5 x 0.45 x 6 bhcs (as31520)
• shock tower cover set (as92580)
• M3X20mm Low Profile Shcs (EL41091)
• shock bushings, 8mm (as92443)
• ft front shock tower -2mm (as92581)
• M3 x 12mm screws (AS25203)
• rear wing mount and body mount (as92417)

Bag 3

• m3x0.5x6mm bhcs (as31531)
• caster/steering block set (as92576) OPTION: (as92577)
• 5x10x4 bearings (as91560)
  
• front axle, 6.5mm (as92462) OPTION: as91683
• ballstud washers 5.5 x 1.0mm blue aluminium x10 (as31382)
• heavy duty ballstud 8mm (10) (as91048)
• steering arm +1mm carbon fibre (as71144)
• caster block link mount set 0mm (as92467)
• M3 locknuts (AS25215)
• m3x0.5x8mm bhcs (as31532)
• caster hat bushings (as91676)
  
• m3x14mm bhcs (10) (as25187)
• hinge pin set (as92496)
• m2 x 0.4 x 4mm bhcs (as31510)
• caster inserts and shims (as92416)

Bag 4

• hinge pin set (as92496)
• rear suspension arms v2 78mm (as92588) or 81mm (as92590)
• ft -1 deg alum. arm mount c (as92585)
• Arm mount inserts (AS92014)
• M3 x 8mm screws (AS25201)
• ft rear inverted shock standoff set (as92497)
• bulkhead washers 7.8 x 1.0mm blue aluminium x10 (as31385)
• rear suspension arms v2 78mm (as92588) or 81mm (as92590)
• M3 x 22mm FHCS (89455) wrong part number in manual
• ft gull dropper/rear tower set -2 (as92578)
• M3 x 12mm screws (AS25203)

Bag 5

• gear differential case & cross pins (as92420)
• ft ltc differntial rebuild set metal (as92306)
• differential gasket & o-rings (as92133)
• hd gear differential outdrive set (as92452)
• ft htc metal diff. rebuild set (as92559) OPTION: as92560
• differential cross pins (as92138)
• gear differential cap (as92461)
• gear diff washer 5x8.5x0.2mm (as91206) inside of (as92306)
• screws m2.5x8m m fhcs (as31472)

Bag 6

• bhcs 3x16mm screws (as89203)
• m3x0.5x8mm bhcs (as31532)
• 3-gear gearbox case (as71215) OPTION: as71221
• 10 x 15 x 4mm factory team bearings (as91563)
• 3-gear gearbox idler gear 54t (as71216)
• 5x10x4 bearings (as91560)
• 3-gear gearbox idler shaft (as71217)
• top shaft (as92447)
• rod ends (as92419)
• anti roll bar hardware (as92457)
• rear anti roll bar set (as92458)
• M3 x 3mm set screws (AS25225)
• M3 x 10mm screws (AS25202)
• FT Rear Anti-Roll Bar Mount (as71215)
• diff height inserts (as92407)
• heavy duty ballstud 8mm (10) (as91048)
• ballstud Washers 5.5 x 2.0mm Blue Aluminium x10  (as31383)
• rear ballstud mount (as92440)
• Arm mount inserts (AS92014)
• arm mount d, aluminium (as92433)
• m3x24mm bhcs (as89204)
• b6/bumpers (as91685)
• Spur Gear Cover/Bumper/B-Head Shims (as92427)
• motor mount (as92439)
• slipper hub inner (as91803)
• octalock spur gear 78t 48dp (as92295)
• octalock FT slipper pad 11mm (as92285)
• ft vented slipper hub set (as92451)
• top shaft screws (as92448)
• m3 flanged locknuts (as25612)
• slipper spring 500lb/in (as92276)
• hd slipper spring & adapters (as91891)
• bulkhead washers 7.8 x 2.0mm blue aluminium x10 (as31386)
• shock tower cover set (as92580)
• screws, m3 x 22mm lp shcs (as41095)
• ft gull dropper/rear tower set -2 (as92578)
• rear wing mount and body mount (as92417)
• ft rear inverted shock standoff set (as92497)
• wing mount set (as92506)
• bhcs 3x12mm screws (as89202)
• M3 x 8mm screws (AS25201)
• m3 x 0.5 x 6 fhcs screws (10) (as31541)

Bag 7

• Heavy Duty Ballstud 6mm (as91047)
• hub link mounts, +1mm (as92441)
• ballstud washers 5.5 x 1.0mm blue aluminium x10 (as31382)
• rear hubs (as92412) OPTION: as92413
• rear hub insert set (as92179)
• M3 x 6mm Set Screws (as81257)
• bhcs 3x12mm screws (as89202)
• hd cva bone, 69mm (as92454)
• cva rebuild kit b5/b5m/b6/b6.1/b64/b74 (as91438)
• cva axles (as91859)
• 10 x 15 x 4mm factory team bearings (as91563)
• 5x12x4 bearings (AS91567)
• cva/wheel hex pin b5/b5m/b6/b6.1/b64 (as91436)
• clamping wheel hex (6.0mm) (as71034)
• m1.6 x 5mm SHCS (For Clamping Wheel Hexes) (as91611)
• rear hub hinge pin (as92188)
• M3 locknuts (AS25215)

Bag 8

• ballcups for 3.5mm turnbuckles (as92308)
• turnbuckles 3.5 x 48mm steel (as92337) OPTION: as92360

Bag 9

• ft 13mm shock pistons, 2.5mm, 2 x 1.6 (as91932) OPTION as71173
• m2 x 0.4 x 4mm bhcs (as31510)
• washers 2.6 x 6mm (as89278)
• 3x21 shock shaft v2 tin (pr) for as (as91615)
• ft 13mm shock pistons, 2.5mm, 2 x 1.9 (as92428) OPTION as71174
• 3x27.5 shock shaft v2 tin for as91577/91578 body (as91619)
• shock bodies, 13 x 23mm (as91920)
• shock bodies, 13 x 27.5mm (as91922)
• 13mm shock caps (as91926)
• 13mm shock rebuild kit (as91996)
• ft low friction x-rings (as91493)
• vcs3 shock bottom cap + o-ring (as31327)
• front axle spacers 1/8" (as4187)
• rod ends (as92419)
• shock pivot balls (as91819)
• 13mm shock collars, blue aluminium (as91928)
• 13mm front shock springs purple 4.6lb/in, l4 (as91946)
• 13mm rear shock springs purple 2.6lb/in, l61 (as91959)
• 13mm shock spring cup set (as91966)
• m3 x 22 button head hex screw (as25189)
• m3 flanged locknuts (as25612)

Bag 10

• screws m3 x 8mm lp shcs (as41096)
• servo tape strips (as6727)
• battery mount/fan mount/servo mount (as92418)
• battery holder o-ring set (as92463)
• M3 locknuts (AS25215)
• m3 x 10 button head hex screw (as25211)
• bhcs m3 x 4mm screw (as91158)
• front wing (as92425)
• Clear Bodyshell (as92422) OPTION: as92423
• rear wing 7 inch (as92424)
• M3 x 10mm screws (AS25202)
• rear wing mount and body mount (as92417)
• adhesive hook and loop (as91743)
• m4 low profile serrated steel wheel nuts (as91150)
• Rear Foam Inserts (u6734)
• Wheel; Hex Rear - White - Off Road (u4366)

RC10B7.1 Parts

• 3-gear gearbox case (as71215)
• Clear Bodyshell (as92422)
• 13mm front shock springs purple 4.6lb/in, l4 (as91946)
• 13mm rear shock springs purple 2.6lb/in, l61 (as91959)
• 13mm shock collars, blue aluminium (as91928)
• 13mm shock spring cup set (as91966)
• M3 x 6mm Set Screws (as81257)
• 3-gear gearbox idler gear 54t (as71216)
• 3-gear gearbox idler shaft (as71217)
• 3x21 shock shaft v2 tin (pr) for as (as91615)
• adhesive hook and loop (as91743)
• anti roll bar hardware (as92457)
• arm mount d, aluminium (as92433)
• b6/bumpers (as91685)
• ballstud Washers 5.5 x 2.0mm Blue Aluminium x10  (as31383)
• ballstud washers 5.5 x 1.0mm blue aluminium x10 (as31382)
• battery holder o-ring set (as92463)
• battery mount/fan mount/servo mount (as92418)
• bodyshell, clear (as92423)
• bulkhead washers 7.8 x 1.0mm blue aluminium x10 (as31385)
• bulkhead washers 7.8 x 2.0mm blue aluminium x10 (as31386)
• caster block link mount set 0mm (as92467)
• caster inserts and shims (as92416)
• caster/steering block set (as92576)
• chassis (as92400)
• clamping wheel hex (6.0mm) (as71034)
• diff height inserts (as92407)
• front anti roll bar set (as92459)
• front axle spacers 1/8" (as4187)
• front axle, 6.5mm (as92462)
• front wing (as92425)
• front wing mount, fan mounts & batt (as91978)
• ft -1 deg alum. arm mount c (as92585)
• ft 13mm shock pistons, 2.5mm, 2 x 1.6 (as91932)
• ft front bulkhead, 0 degree (as92436)
• ft front shock tower -2mm (as92581)
• ft gull dropper/rear tower set -2 (as92578)
• ft htc metal diff. rebuild set (as92559)
• ft rear inverted shock standoff set (as92497)
• ft titanium turnbuckle set 3.5mm (as92360)
• ft vented slipper hub set (as92451)
• gear differential cap (as92461)
• gear differential case & cross pins (as92420)
• hd ballstuds, short 6mm (as32042)
• hd ballstuds, short 8mm (as32040)
• hd slipper spring & adapters (as91891)
• heavy duty ballstud 8mm (10) (as91048)
• hinge pin set (as92496)
• m1.6 x 5mm SHCS (For Clamping Wheel Hexes) (as91611)
• m3 x 0.5 x 6 fhcs screws (10) (as31541)
• m3 x 12mm set screw (as81258)
• m3x14mm bhcs (10) (as25187)
• motor mount (as92439)
• octalock FT slipper pad 11mm (as92285)
• rear anti roll bar set (as92458)
• rear ballstud mount (as92440)
• rear suspension arms v2 78mm (as92588)
• rear wing 7 inch (as92424)
• rear wing mount and body mount (as92417)
• rod ends (as92579)
• screws, m2x3 mm fhcs (as91749)
• servo tape strips (as6727)
• shcs 3x16mm screws (10) (as89224)
• shock bushings, 8mm (as92443)
• shock pivot balls (as91819)
• shock tower cover set (as92580)
• Front Hinge Pin Brace (as71222)
• side rails (as92401)
• Front Suspension Arms (as92574)
• slipper hub inner (as91803)
• slipper spring 500lb/in (as92276)
• steering bellcrank and rack set (as91973)
• steering arm +1mm carbon fibre (as71144)
• steering hat bushing set (as91974)
• top plate & ballstud mount (as92586)
• top shaft (as92447)
• top shaft screws (as92448)
• M3X20mm Low Profile Shcs (EL41091)
• vcs3 shock bottom cap + o-ring (as31327)
• washers 2.6 x 6mm (as89278)
• wing mount set (as92506)
  
• Arm mount inserts (AS92014)
• 5x10x4 bearings (AS91560)
• 5x12x4 bearings (AS91567)
• 4x7x2.5 bearings (AS31732)
• M3 locknuts (AS25215)
• M3 x 8mm screws (AS25201)
• M3 x 10mm screws (AS25202)
• M3 x 12mm screws (AS25203)
• M3 x 3mm set screws (AS25225)
• Ballstuds (AS91047 / AS91048 / AS91049)
  
• m3 x 22 button head hex screw (as25189)
• m3 x 10 button head hex screw (as25211)
• m3 flanged locknuts (as25612)
• screws m2.5x8m m fhcs (as31472)
• m2 x 0.4 x 4mm bhcs (as31510)
• m2.5 x 0.45 x 6 bhcs (as31520)
• m3x0.5x6mm bhcs (as31531)
• m3x0.5x8mm bhcs (as31532)
• screws, m3 x 22mm lp shcs (as41095)
• screws m3 x 8mm lp shcs (as41096)
• bhcs 3x12mm screws (as89202)
• bhcs 3x16mm screws (as89203)
• m3x24mm bhcs (as89204)
• fhcs 3x14mm screws (as89208)
• m4 low profile serrated steel wheel nuts (as91150)
• bhcs m3 x 4mm screw (as91158)
• cva/wheel hex pin b5/b5m/b6/b6.1/b64 (as91436)
• cva rebuild kit b5/b5m/b6/b6.1/b64/b74 (as91438)
• ft low friction x-rings (as91493)
• 10 x 15 x 4mm factory team bearings (as91563)
• 3x27.5 shock shaft v2 tin for as91577/91578 body (as91619)
• caster hat bushings (as91676)
• servo horns 15.5mm (as91728)
• cva axles (as91859)
• shock bodies, 13 x 23mm (as91920)
• shock bodies, 13 x 27.5mm (as91922)
• 13mm shock caps (as91926)
• 13mm shock rebuild kit (as91996)
• differential gasket & o-rings (as92133)
• differential cross pins (as92138)
• rear hub insert set (as92179)
• rear hub hinge pin (as92188)
• octalock spur gear 78t 48dp (as92295)
• ft ltc differntial rebuild set metal (as92306)
• ballcups for 3.5mm turnbuckles (as92308)
• turnbuckles 3.5 x 48mm steel (as92337)
• rear hubs (as92412)
• rod ends (as92419)
• hub link mounts, +1mm (as92441)
• hd gear differential outdrive set (as92452)
• hd cva bone, 69mm (as92454)
• M3X6mm Lp Shcs (EL41089)

TOTAL COST = ~£1500

B7.1 Parts Shared With Other Team Associated Platforms

One of the useful things about the B7.1 platform is that a number of service items are also shared with the B7 and B84. That makes it easier to build a sensible shared spares box if you run more than one car.

Shop RC10B7.1 Spares

Browse our Team Associated spares collection for RC10B7.1, B7 and B84 race parts and service items.